Skip to content

Step deck dispatch that measures the freight before it books the load

A step deck earns its keep on the loads a flatbed cannot legally carry: tall machinery, stacked crates, equipment that clears 13 ft 6 in only because your lower deck sits closer to the road. Our step deck dispatch desk books that freight on its height, not its hopes, and keeps every load inside legal size so nobody is surprised at the scale house.

Quick answers

Step deck dispatch FAQs

Carriers ask us the same five things before they sign up. The answers come first because they decide whether this desk fits your trailer at all.

Do step deck loads need permits?

Most do not, and that is the point of the trailer. Federal rules cap width at 102 inches on the National Network and states set height, usually 13 ft 6 in to 14 ft 6 in. A load that fits both, plus the axle and gross weight limits, moves without a permit. Anything over any one limit needs a permit from every state it crosses.

Can a new MC get step deck loads?

Yes. Open deck brokers check authority age like everyone else, but step deck freight has fewer trucks chasing it, so some brokers accept a younger MC with clean insurance and a tidy packet. We pitch you to those brokers first and tell you plainly which lanes need more history before they open up.

What does a step deck dispatcher need from me?

Your deck heights and lengths (upper and lower, measured, not quoted from the listing), ramps if you have them, tarp sizes, securement gear count, insurance certificate with cargo limits, W-9, MC and USDOT numbers, and your floor: the lowest rate per mile you will run. With those, a step deck dispatcher can quote you honestly to a broker on the first call.

Do you handle oversize permits?

No. We do not file permits and we do not book oversize or overweight loads. This desk books step deck freight that fits legal size and weight. If a load needs a permit, it is not on our board, and we say so before you spend a minute on it. Height, width and weight get checked against the card below first.

Do step decks get paid more than flatbeds?

Often a little more per mile on the same lane, because fewer trucks can take tall freight legally and rollbacks or ramps add labor. It is not a rule, and some step deck loads pay flatbed money. We quote each load on its own numbers and never book under the floor you set.

Permit decision card

Legal size or permit load? The step deck decision card

Run the load through these four rows before anyone says yes. If every row lands in the left column, it is a legal load and we can book it. If any row lands on the right, it is a permit load and it is off our board. Limits checked October 2026 against FHWA and the eCFR; state rules can be stricter on non-designated roads, so the state page always wins.

CheckLegal: we can book itPermit needed: off our board
Width§ 23 CFR 658.15102 inches (8 ft 6 in) or less, safety devices like mirrors excludedOver 102 inches, even by an inch of strap ratchet or overhanging crate
Height§ FHWA size limitsFreight plus deck stays under the state limit, commonly 13 ft 6 in east and up to 14 ft or more in parts of the WestOver the lowest height limit of any state on the route. No federal height limit exists, so each state decides
Length§ 23 CFR 658.13States must allow at least a 48 ft semitrailer on the National Network; 53 ft is widely allowedOver the state's trailer length or overhang rule, which varies by state and by road
Weight§ 23 CFR 658.1780,000 lbs gross, 20,000 lbs single axle, 34,000 lbs tandem, and the bridge formula for your spacingOver any of those, including a legal gross with too much on one axle group

EXAMPLEA lower deck about 3 ft 6 in off the ground under a 13 ft 6 in state limit leaves roughly 10 ft for the freight. Your trailer is the real number: measure the lower deck loaded, at the axles, and give us that.

Permit rules and offices are listed state by state on the FHWA state permit offices page. Our trucking permits guide explains the difference between a size permit, a fuel permit and a trip permit.

Not legal advice. Limits checked Oct 2026; state rules can be stricter than the federal floor.

Freight we book

What a step deck dispatcher books for you

Tall freight is the reason the trailer exists, so we chase the loads that need the drop.

01Tall machinery

Excavators, lifts, compressors and packaged equipment that clears legal height on the lower deck and would not on a flatbed. Ramps widen the list to anything that drives on.

02Crated and stacked freight

Industrial crates, HVAC units and stacked materials that run tall but light. The deck height decides; we confirm dimensions from the shipper in writing before we quote.

03Building materials and steel

Plain flatbed freight that rides fine on a step deck. It fills the gaps between tall loads and keeps the week moving when machinery is slow.

Every load reaches you with dimensions, weight, pickup window, rate and any tarp or rollback terms. The rate con goes from the broker directly to you, and you can simply say no.

Covered decks

Conestoga dispatch: the rolling tarp changes the freight

A Conestoga is a step deck or flatbed with a sliding tarp system, and it opens freight that hates weather and hates tarping time: finished goods, coated steel, crated electronics, anything a shipper wants covered and loaded from the side or the top. Conestoga dispatch is a pitch about protection and speed. We sell the covered deck to the brokers who need it, and we watch the one limit the system adds: interior clearance under the bows is lower than open deck height, so the freight has to fit inside the frame, not just under the bridge. Give us your inside height and width at the lowest point and we quote only what fits.

What we do and what we do not

  • Send your carrier packet to open deck brokers and get you set up
  • Find, check and negotiate step deck and Conestoga loads above your floor
  • Confirm dimensions and weight against the legal limits before we quote
  • Write tarp pay, rollback time and detention into the rate con
  • File or buy permits, or book oversize and overweight loads
  • Sell insurance or file authority for you
  • Book a load you have not approved: every rate con is your call
The fee

Step deck dispatch fees

Step deck and Conestoga dispatch use the same rate card as every truck we dispatch: 5% of gross for one truck with 6 months of authority or more. An example standard week:

7% while an MC is under 6 months, dropping to 5% automatically at six months; 4% per truck for fleets of 2 or more. No setup fee, no minimums, month to month with 30 days notice, and the fee only applies to loads you haul. No haul, no pay. Loads that fit a flat deck belong with flatbed dispatch, and the full price list is on the truck dispatch fees page. Still setting up the authority itself? Start with the MC number requirements.

One week, step deck, standard (EXAMPLE)EXAMPLE
  1. 1Gross for the week$7,200
  2. 2Fee rate (standard)5%
  3. 3Dispatch fee$360
  4. 4You keep$6840
More from the desk

Other equipment we dispatch

Step decks share the desk and the rate card with every other truck on our truck dispatch service. Machinery and equipment shippers often pay on 30 day terms or longer, so compare freight factoring terms before the first tall load delivers.

By situation: New authority dispatch · Owner operator dispatch · Small fleet dispatch · Can't find loads? · Dispatcher vs load board · How truck dispatch works · Dispatcher vs broker · Regional dispatch service · Southeast truck dispatch · Slow freight market dispatch · After a lease-purchase

Next step

Tall, legal, loaded. Then loaded again.

Step deck and Conestoga freight booked on measured height. 5% standard, month-to-month, and you approve every load.